# Connect Google Analytics to Baker

> Open Brain → Integrations, press Connect next to Google Analytics 4 account, sign in with a Google account that has Editor access to your property and allow both permissions. Then choose your property and save. Baker can now read your reports and prepare changes, which apply only when you press Publish. Disconnect from the same card; changes already applied stay in Google Analytics.

Source: https://withbaker.com/help/integrations/google-analytics · Updated 2026-11-21 · Who can do this: admins and members

## Before you start

- A Google Analytics 4 property.
- A Google account with Editor access to that property, so Baker can change what it measures.
- An admin or member role in Baker, or a setup link sent by someone who has one.

## What does the Google Analytics connection do?

Baker uses your Google Analytics 4 property in two ways:

- **Reading.** Ask where conversions come from, which channels bring traffic or how a page performs, in a chat or in a Report. Baker can also audit how the property is set up.
- **Changing what it measures.** Baker can prepare key events, custom dimensions and metrics, custom events, data retention, enhanced measurement, audiences, the link to Google Ads and property settings. You review them in the chat, and they apply when you press **Publish**.

Separately, the **Google Analytics tag** puts GA4 on every landing page Baker publishes, so those pages and their Forms report to your property.

![The Google Analytics card in Brain, Integrations, with the account connected and the GA4 tag added](https://withbaker.com/help/screens/integrations-google-analytics-card.webp)

## Before you begin

1. **A Google Analytics 4 property.**
2. **A Google account with Editor access to it.** With less access Baker can read reports, but changes fail.
3. **An admin or member role in Baker.** Viewers can't connect accounts.

If someone else holds the access, send them this message, or a [setup link](https://withbaker.com/help/setup-link.md) so they can connect without a Baker login:

> Hi! We use Baker for our marketing and want it to read our Google Analytics 4 property and set up conversions there. Could you connect it? Sign in with a Google account that has Editor access to the property and allow both permissions. Baker only changes the property when we approve and publish the change.

## Connect Google Analytics

1. In Baker, open **Brain → Integrations** and stay on the **Platforms** tab.
2. Find **Google Analytics** under **Analytics**.
3. Next to **Google Analytics 4 account**, press **Connect**. A Google window opens.
4. Choose the Google account with access to your property.
5. Allow both permissions Google lists for Baker. The next section explains them.
6. Back in Baker, the **Google Analytics Properties** list opens. Tick your property under **Available resources** and press **Save changes**.

![The Google Analytics Properties list, with one property ticked under Available resources](https://withbaker.com/help/screens/integrations-google-analytics-properties-picker.webp)

You can change the selection later with **Properties** on the account row. You can also connect from a chat: when Baker needs Google Analytics, it shows a card with a button to connect without leaving the conversation.

## Which permissions does Baker ask for?

| Permission in Baker | Google permission | What Baker uses it for |
| --- | --- | --- |
| See your Analytics reports | `analytics.readonly` | Reports, answers in chats and the property audit |
| Change what your Analytics property measures | `analytics.edit` | The changes you approve, applied at Publish |

Baker also asks for your Google email and basic profile, to show which account is connected.

![The permissions list on the Google Analytics account, showing both permissions granted](https://withbaker.com/help/screens/google-analytics-permissions.webp)

## What does success look like?

- The **Google Analytics** card shows your account with a green check, a **Properties** count, and **2 of 2 permissions granted**.
- In a chat, ask "How many sessions did we get last week by channel?" and Baker answers from your property.

## Add the GA4 tag to your landing pages

1. On the **Google Analytics** card, next to **Google Analytics tag on your landing pages**, press **Add**.
2. Enter your **Measurement ID** (it starts with G-).
3. Optionally add an **API Secret**, so Form events also reach GA4 from Baker's side when a browser blocks Google's script.
4. Press **Add to landing pages**. Your landing pages update within a few minutes.

More about tags: [add a tag to your landing pages](https://withbaker.com/help/integrations/tracking-tags.md).

## Use it every day

- **Questions:** "Which channels brought the most conversions this month?"
- **Audits:** "Check my GA4 setup before we trust these numbers."
- **Changes:** "Mark the demo request Form submission as a key event." Baker adds it to the chat's changes. Press **Publish** to apply it.

> [!WARNING]
> Archiving or deleting something in Google Analytics is permanent, and an applied change has no version to go back to. Baker asks you to confirm those before it prepares them.

## Disconnect Google Analytics

1. Open **Brain → Integrations** and find your account on the **Google Analytics** card.
2. Press the bin icon (**Disconnect account**) and confirm with **Disconnect**.

![The Disconnect account dialog, warning that anything relying on the account stops until it is connected again](https://withbaker.com/help/screens/integrations-disconnect-dialog.webp)

The GA4 tag is separate: to take it off your landing pages, press **Manage** next to the tag and choose **Remove from landing pages**.

## What happens to your data?

**In Google Analytics:** nothing is removed. Changes Baker already applied stay on your property, and your data stays where it is.

**In Baker:** Baker deletes its sign-in to your Google account and stops reading the property. Reports and routines that read Google Analytics stop until you connect it again. If you publish a chat with Google Analytics changes while disconnected, those changes fail. Reconnect, then ask Baker to fix them.

**In your Google Account:** disconnecting in Baker does not remove Baker from your Google Account's list of third-party connections. You can remove it there. Baker uses one Google sign-in for all its Google connections, so removing it there also stops any Google Ads, Tag Manager, Search Console or Google Drive connection made with the same Google account.

## Get help

Write to **support@withbaker.com** or use the [contact page](https://withbaker.com/help/contact). No login needed, and we reply within 24 hours.

## Try asking Baker

> Audit my Google Analytics property and tell me which of my landing page Forms are not counted as key events yet.

## What happens when you publish

The Google Analytics changes in the chat apply to your property one by one and take effect at once. Google Analytics keeps no version to go back to.

## Troubleshooting

- If you see "Baker says the connection can read the property but not change it.": The connection was made before Baker could change GA4 settings. Press Reconnect to refresh permissions on the account row and allow both permissions. Reports keep working meanwhile.
- If you see "The card shows 1 of 2 permissions granted.": The change permission was left unticked on Google's screen. Reconnect and allow both.
- If you see "The property list says No accessible GA4 properties found.": The Google account you signed in with cannot open any GA4 property. Ask the property's admin to add that account, or press Add another and sign in with the right one.
- If you see "A change failed at Publish saying the Google account isn't allowed to change the property.": The account needs Editor access to the property. Ask the property's admin for it, reconnect, then ask Baker to try the change again.
- If you see "Linking Google Ads failed at Publish.": The link needs Editor access to the property and admin access to the Google Ads account. The Google Ads side is usually the missing one.

## Questions

### Is the Google Analytics account the same as the GA4 tag?

No. The account lets Baker read and change your property. The tag makes your landing pages send visits and Form events to it. Most teams want both, and each is set up on its own.

### Can I connect more than one property?

Yes. Choose several in the property list, or press Add another to connect a second Google account. A single chat's changes apply to one property.

### Can a colleague connect it without a Baker login?

Yes. Send them a setup link. They sign in with their Google account from it and the property connects to your company in Baker.

## Next steps

- [Read your results in Measure and Reports](https://withbaker.com/help/read-your-reports.md)
- [Connect Google Tag Manager to Baker](https://withbaker.com/help/integrations/google-tag-manager.md)
- [Reconnect an account when Baker asks](https://withbaker.com/help/reconnect-an-account.md)

## Still stuck?

Write to support@withbaker.com. A person answers within 24 hours. https://withbaker.com/help/contact
